Products Catalog
PAP10 System
Introduction:
This is a portable multi-function system which consists of two plastic loudspeakers and a 10 channel powered mixer and two wireless microphones W106R/TH(Optional ).
When used with the speaker stands, it is very suitable for the applications, such as salon, party, band performance, outdoors activity aconference reinforcement, etc.
This is a portable multi-function system which consists of two plastic loudspeakers and a 10 channel powered mixer and two wireless microphones W106R/TH(Optional ).
When used with the speaker stands, it is very suitable for the applications, such as salon, party, band performance, outdoors activity aconference reinforcement, etc.
(5)
-
Features
> Two way 10 inch plastic loudspeaker features excellent tone, light weight, constant directivity HF horn. The loudspeaker can be used as main loudspeaker or stage monitor.
> The powered mixer has 10 channel inputs (4 mono mic/line inputs+6 mono/3 mono stereo line inputs ), EQ, DSP, feedback compressor and power ampliier for convenient application.
> Class D power ampliier with high eficiency and low distortion and splendid tone.
> Universal 110V~230V switch mode power supply
> Ipad/Iphone USB port to connect with cell phone
> The master output of mixer boosts LF.
> High resolution DSP with 16 programs and effect depth.
> 3 band EQ to ix tone freely.
> High impedance instrument input
> Aux and sub outputs
> Footswitch control
> WIFI input
> Quick set up of the mixer
-
Specification
Model PAP10 Type 10" two way active speaker cabinet system Frequency response 70Hz~20kHz(±3dB) 60Hz~20kHz(-10dB) Sensitivity(1m/1W) 94dB Max SPL(@1m) 122dB Speaker cabinet Nominal Impedance 4Ω Power 200Wx2 LF speaker cabinet 1X10" woofer/50mm voice coil/200W HF driver 1X 34mm HF driver/34mm voice coil /30W Coverage(H*V) 90° x 60° Crossover 2.5kHz Connector JACK Speaker cabinet dimension (W*H*D) 348x557x330(mm) Speaker system net weight 32kg Mixer Mic gain -50dB(bal) Line gain -18dB Mic in impedance MIC1/2 1.2k Ohms-MIC3/4 3k Ohms Line in impedance Line5/10 10k Ohms MIC/ST CH EQ LF ±15dB ±3dB,100Hz MF ±15dB ±3dB,2.7kHz HF ±15dB ±3dB,10kHz Amp out power 2x250W (THD<1%, 4 Ω@1kHz) THD ≤0.3%(1kHz,90W) Frequency response 20Hz~20kHz,± 3dB(1W, 4 Ω) Rated voltage AC 100V~240V/50Hz 
W106R/TH 2.4gHz Digital wireless MIC
This compact USB receiver (2.4G universal frequency band ) supports plug & play application. The USB interface offers power supply and delivers audio output. The receiver matches frequency for operation and is suitable for PA system wireless microphone of our company. Compared with the built-in mechanical design, it reduces the interference. (The other mode) When it is connected with USB device, two microphones can share this receiver. This product is suitable for recording, teaching, etc.
Model W106R/TH Operation voltage TX:+3.3V DC RX:+5V DC Supply current TX: 100mA (Codec not Included) RX: 55mA RF Frequency 2400 ~ 2483MHz Modulation GFSK Data rate 2M bps TX Power +18dBm RX Sensitivity -92dBm RF Range (indoor) 30m Frequency Response 20~20kHz S/N 85dB @ 20~20kHz THD+N < 0.01% @ 20~20kHz Dynamic range 80dB
-
Comments
