AKT700/AKT1000/AKT1600/AKT2400
Introduction:

1. Power Supply

“AK” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core using cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and use high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load. Match the mega bass have enough energy to control paper cone. The presentation of good strength.

 

2. Amplifying Circuit

“AK” intelligent amplifier can work long hours and under pressure with a loud voice power not smaller and it also won't appear overheating protection. Power amplifier inside there is a real time automatic detection of load impedance circuit. So when the load impedance is lower than the product of the preset value, detection circuit will call this information is sent to a gain of self-locking circuit. Circuit will make some corresponding adjustment, in does not affect the products under the premise of stable work, the output power will adjust according to the size of the load accordingly, so as to ensure the stability of the product, and doesn't affect the use of the load.

“AK” intelligent power amplifier is not easy to overheating protection; the efficiency of the whole machine can reach 89 in 8 Ω conditions. So in normal use is not easy to appear the phenomenon of overheating protection. If due to environment or other reasons lead to rapid temperature rise of the power amplifier, at a certain temperature, the power amplifier within the sensor will automatically by the MCU to turn up the volume fell by 1 dB, at this time if the temperature continues to rise, the volume is automatically drop 1 dB, stop rising and start falling, if the temperature when dropped to a certain temperature, the volume is automatically increased, so far has been added to the initial value. And it has the very good music quality as class AB amplifier, and the efficiency of class D power amplifier.

 

3. Complete Appliance

“AK” intelligent signal amplification signal processing of the power amplifier and power supply are interrelated. In power amplifier is started, the total control circuit can automatically detect the relevant circuit state, confirmed after each part of the circuit there is no problem to start work. In the process of work, each part of the circuit with MCU can own working state real time detection, and the data sent to the rest of the associated circuits. Other parts at the same time bring the MCU also in the working state of the field testing itself, and to send the information to the rest of the associated circuit, for mutual exchange. In the process of information exchange, if data change in one part of the circuit, then the other circuit will automatically make the corresponding adjustment, make the product stability and reliability to improve on an unprecedented scale.

 

4. Built-in high-performance DSP processor

“AK” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter; Each channel has 5 parametric equalizer, all parameters are adjustable; Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe - sharp, beisaier, butterworth; Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval; Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate; 30 users memory, intuitive and friendly computer interface, RJ45 interface; Channel Copy function, convenient debugging and so on many merits.


Application:
PDF download Consulting Details
Features
Specification
Model AKT700AKT1000AKT1600AKT2400
Number of input channels2222
Number of output channels2222
RMS. Output Power(EIA (AC230V)



8 ohms ch.700W1000W1600W2400W
4 ohms ch.1200W1700W2700W3800W
2 ohms ch.1200W1700W2700W3800W
8 ohms bridged2000W2800W4600W6200W
4 ohms bridged2000W2800W4600W6200W
Special function



Built-in DSP processorYESYESYESYES
The matrix of input signalNONONONO
PC MonitorYESYESYESYES
Standby systemYESYESYESYES
Dimensions / Weight



Dimensions (W/H/D)483 mm*88 mm (2 U) *440 mm(Depth contains handle and the rear support)
Weight14kg14kg14.5kg15 kg
AppearanceBlack painted steel chassis with black painted steel/aluminum front


Recommend
Soundking is a globalised industrial Group focusing on engineering, production, marketing and installation of pro audio, digital cinema and other live performance related equipment.
Contact us
Address: Ningbo City, Zhejiang Province integrity Road 818 Zip code:315140 Tel:0574-88235195 E-mail:Sales@soundking.com
Copyright ©2018- 2021 Yinwang Electroacoustic Co., Ltd.粤ICP备09063742号-1Sitemap 浙公网安备 33010002000078号
x
企业下单 请咨询(8621-34120222)
  • 联系人 *
  • 手机号码 *
  • 需求(请简要描述您的需求,谢谢) *
3

SKYPE 设置

    330101
4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

6

二维码管理