|
8 CH digital audio input
|
High performance ARM operation system: 32 bit DSP
|
|
8 CH analog audio input
|
Each channel output has -12dB~+12dB gain control, each step: 0.1Db
|
|
optical fiber input
|
Background input RCA connector, input 25 pin connector, output 25 pin connector
|
|
Non-synchronous dual channel stereo input
|
Input and output have delay
|
|
input connector: one channel optical audio signal input
|
all output channel compressor has attach level, compression ratio, attach time and release time. the parameter can be adjusted.
|
|
(S/PDIF),one channel digital coaxial signal input
|
Each channel parametric EQ, frequency, gain: 3 parametric EQ modes for selection
|
|
Each channel 31 band graphic EQ and 5 band parametric EQ
|
HPFLPF slope: 6,12,18,24,36dB or 48dB,
|
|
14 CH analog output
|
modes for selection: Butterworth、Bessel 、Linkwitz-Riley,range: 20Hz~22kHz,
|
|
LCD
|
crossover can be at any frequency
|
|
S/N ratio: 110 dB weighted(20~20kHz)
|
20 user saving spaces; 1 factory setting,
|
|
distortion: 0.002%
|
frequency response: 20Hz~22kHz
|
|
CMMR: > 60dB (50 to 10kHz)
|
USB control, PC control software, SD card
|
|
dynamic range: 105dB typ (unweighted)
|
port: 100M ETHERNET (ethernet)
|
|
frequency response: +/- 0.01dB (20 to 20kHz)
|
Support remote control and TMS cinema management software
|
|
PCM sample frequency: 32kHz,44.1kHz,48kHz and 96kHz
|
Analog 8 channel inputs: 25 pin D type female connector
|
|
sample support: 20 and 24-BIT
|
Master out: 25 pin D type male connector
|
|
input impedance: 10kΩ
|
(AC-3)7.1 channel
|
|
Monitor uses 20W amp and 5”speaker
|
Digital 1 input: 4*AES 25pin D type connector provides 4 channel AES/EBU inputs
|
|
input delay: 0~175 ms
|
4*AES input
|